Home

How to Unlock Any Master Lock Combination Padlock

Aug 16, 2012 09:29 PM

Let's say you forgot the code to your Master Lock combination padlock. What can you do besides buy another one? Well, there's a surprising abundance of ways to open a combination lock other than with just the combination, some of which will even let you reset the code. Of course, these hacks aren't limited to folks just looking to open their own locks, but let's just assume that's what you're here for.

The Beer Can Shimmy

The easiest method is probably to use a thin piece of metal called a "shim" to unlatch the locking mechanism on the shackle. A beer can cut up with scissors will suffice for most locks, a pretty low-tech solution if you don't have many options.

Head on over to this article to see how the same method can be used to break newer locks with "anti-shim" mechanisms.

Deciphering the Combination

If you'd like to try a more subtle approach, you can always just hack the lock's combination. This trick narrows the possible combinations down to only a hundred or so. It requires some math skills, and definitely a little patience, but given both, you'll soon have the combination to the Master Lock of your choosing.

With a Drill

If all else fails, you can always crack the lock with a good old-fashioned safe cracking trick. Using a drill and a flashlight, you can find the combination to any Master Lock in four easy steps.

Step 1: Drill a Hole

Drill a quarter-inch diameter hole halfway between 9 and 12 o'clock, just inside the ring.

Step 2: Find the Spinning Disk

Shine a light inside the hole to see the disk that spins when the dial is moved. Look for a U-shaped notch on the top disk. Once you find the first notch, line it up with the hole you drilled and note the number that the dial is on.

Step 3: Find the Second Disk

Find the second disk underneath the top one. Spin the lock in the opposite direction to locate the second notch.

Step 4: Find the Third Disk

Repeat for the third disk (reversing the direction once again). You should now have the combination for the lock. If you want to reuse the lock after this, superglue something onto the back to cover the hole.